Switching Display; Station/Disc Naming (Snps/Dnps) - Kenwood KDC-MP425 Instruction Manual

General features

Switching Display

Switching the information displayed.
Press the [DISP] button.
Each time the button is pressed the display
switches as shown below.
In Tuner source
Information
Station name or Frequency
Frequency
Clock
In CD & External disc source
Information
Disc title
Track title
Track number & Play time
Disc name
Clock
In MP3/WMA source
Information
Song title & Artist name
Album name & Artist name
Folder name
File name
Track number & Play time
Clock
In HD Radio source
Information
Station name
Song title/ Artist name/
Album name/ Genre
Frequency
Clock
In Auxiliary input source
Information
Auxiliary input name
Clock
• If the Disc title, Track title, Song title & Artist name, or
Album name & Artist name is selected when the disc
which does not have Disc title, Track title, Song title,
Album name, or Artist name is played, track number
and play time are displayed.
12
|
English
Display
"SNPS"
"BAND+FREQ"
Display
"D-TITLE"
"T-TITLE"
"P-Time"
"DNPS"
Display
"TITLE"
"ALBUM"
"FOLDER NAME"
"FILE NAME"
"P-Time"
Display
"Station Name"
"Title"
"Frequency"

Station/Disc Naming (SNPS/DNPS)

Attaching a title to a Station or CD.
1
Receive/play the station/disc you want to
attach a title to
• A title can't be attached to an MD.
• Refer to the 'Switching Display' (page 12) and select
either "DNPS" or "SNPS". No name can be attached to
the source if "DNPS" or "SNPS" cannot be selected for
it.
2
Enter name set mode
Press the [NAME.S] button for at least 2
seconds.
"NAME SET" is displayed.
3
Move the cursor to the enter character
position
Press the [4] or [¢] button.
4
Select the character type
Press the [38] button.
Each time the button is pressed the character
type switches as shown below.
Character type
Alphabet upper case
Alphabet lower case
Numbers and symbols
Special characters (Accent characters)
5
Select the characters
Press the [FM] or [AM] button.
• Characters can be entered by using a remote with a
number buttons.
Example: If "DANCE" is entered.
Character Button
"D" [3]
"A" [2]
"N" [6]
"C" [2]
"E" [3]
6
Repeat steps 3 through 5 and enter the name.
7
Exit name set mode
Press the [NAME.S] button.
• When operation stops for 10 seconds the name at
Times pressed
1
1
2
3
2