Kenwood KDC-BT30 Instruction Manual page 27

Preparing the remote control unit
Pull the battery sheet out from the remote control
unit to the direction of the arrow.
Changing the battery of the remote control
unit
Use a commercially available button battery (CR2025).
1
Insert something narrow like a paperclip into the
hole and pull out the battery tray.
Press
Pull out
2
Insert the battery with the + and – poles aligned
properly, following the illustration inside the case.
CR2025(+side)
¤
CAUTION
• Do not set the remote control in hot places such
as on the dashboard.
• Lithium battery.
Danger of explosion if the battery is incorrectly
replaced.
Replace only with the same or equivalent type.
• The battery pack or batteries shall not be exposed
to excessive heat such sunshine, fire or the like.
• Keep battery out of reach of children and in
original package until ready to use. Dispose of
used batteries promptly. If swallowed contact
physician immediately.
27
|
English