3 Back Panel
POWER:
The Power socket is where you will connect the power adapter. Please use the
power adapter provided with this TL-WR1043ND Wireless N Gigabit Router.
RESET:
There are two ways to reset to the Router's factory defaults:
1. Use the Factory Defaults function on System Tools -> Factory Defaults page in
2. Use the Factory Default Reset button: Press the Reset button for five seconds
USB:
Connect with USB Mass Storage Device.
WAN:
This WAN port is where you will connect the DSL/cable Modem, or Ethernet.
1,2,3,4 (LAN):
These ports (1, 2, 3, 4) connect the Router to the local PC(s).
Wireless antenna:
To receive and transmit the wireless data.
the Router's Web-based Utility.
and then wait for the Router to reboot.
Page | 4