Menu System; Touch Sensor Tone - Kenwood KDC-136 Instruction Manual

Menu system

Menu System
Setting beep sound during operation, etc.
functions.
The Menu system basic operation method is
explained here. The reference for the Menu items
and their setting content is after this operation
explanation.
1
Enter Menu mode
Press the [MENU] button for at least 1 second.
"MEnU" is displayed.
2
Select the menu item
Push the Control knob towards [FM] or [AM].
Example: When you want to set the beep sound
select the "BEEP" display.
3
Set the menu item
Push the Control knob towards [4] or [¢].
Example: When you select "BEEP", each time you
push the knob it alternates between "On
BEEP" or "OFF BEEP". Select 1 of them as
the setting.
You can continue by returning to step 2 and
setting other items.
12
|
English
Menu display
4
Exit Menu mode
Press the [MENU] button.
⁄
• When other items those applicable to the basic
operation method above are displayed, their setting
content chart is entered. (Normally the setting listed at
the top of the chart is the original setting.)
Also, the explanation for items that are not applicable
(<Manual Clock Adjustment> etc.) are entered step by
step.
In Standby mode

Touch Sensor Tone

Setting the operation check sound (beep sound)
ON/OFF.
Display
"On BEEP"
"OFF BEEP"
Control knob
Setting
Beep is heard.
Beep canceled.