Table of Contents
Advertisement
OFF Turns off the dayinight function and compass. The mirror will stay i n
the day setting.
To keep
the photocells operating well, occasionally clean them with a
cotton
swab
and glass cleaner.
M: This turns
o n
the day/night portion o f the mirror
t o
automatically
reduce glare.
C/M: This setting turns on the compass in addition to the dayinight
function. A letter denoting the direction headed will appear in the top
right corner of the mirror.
Once the compass is calibrated,
it
does not need to be recalibrated.
To calibrate the compass:
1.
Set the switch on the mirror control to C/M.
2. Turn the vehicle ignition switch ON. The Ictter C should be displayed
in the mirror compass window. If not, hold the Cal switch (bottom
of
the mirror) for more than 1 0 seconds, and thc letter C will appear.
To
hold in the Cal switch, insert a paper clip into the small hole on the
bottom of the mirror housing. The display w i l l show
a
number first, hut
keep holding
urltil
the letter C appears.
than 5 mph (8 km/h) until the display reads
a compass direction. For
3. For quick calibration, drive the whiclc in a 360-degree circle
a t
less
3-60
Advertisement
Table of Contents
