Rear Panel - NAD T 787 Owner's Manual

IDENTIFICATION OF CONTROLS

REAR PANEL

1 2
ANTENNA
FM GND AM
DIGITAL
S-VIDEO
HDMI
AUDIO
IN
ETHERNET
3
MP
DOCK
OUT OUT DATA PORT MONITOR
OUT
10 11 12 13
ATTENTION!
Please make sure that the T 787 is powered off or unplugged from the mains power source before making any connections. It is also advisable to power
down or unplug all associated components while making or breaking any signal or AC power connections.
1 DIGITAL AUDIO (COAXIAL 1-3, OPTICAL 1-3)
• Connect to the corresponding optical or coaxial digital output of
sources such as CD or BD/DVD players, digital cable box, digital
tuners and other applicable components.
• Coaxial and Optical digital input association is configurable via the
Source Setup item of the Setup Menu OSD.
DIGITAL AUDIO OUT (OPTICAL, COAXIAL)
• Connect the optical or coaxial DIGITAL OUT to the corresponding
digital audio input of compatible devices such as receivers,
computer soundcard or other digital processors.
2 FM ANTENNA TERMINAL
• The supplied wire "dipole" FM antenna will connect to the FM
connector using the supplied "balun" adapter. It will usually work
best when mounted on a vertical surface such as a wall, with arms
fully outstretched forming a horizontal "T" perpendicular to the
origin point of the signal.
8
230V VERSION ONLY
3 4
AUDIO 7.1 CH INPUT
VIDEO
R L R L
R L
2
AUDIO
PRE-OUT
VIDEO
1
AUDIO
R L
15 16
14
5 6 7
DAB
XM
RS-232
17
AM ANTENNA TERMINAL
The AM loop antenna supplied with the T 787 (or a suitable
replacement) is required for AM reception.
• Connect the supplied AM loop antenna to these terminals. If an
external AM antenna is used, make connections to the AM and GND
terminals in accordance with the instructions supplied with the
antenna.
• Testing different positions for the antenna may improve reception;
vertical orientation will usually produce the best results. Antenna
proximity to large metal objects (appliances, radiators) may impair
reception, as will as attempts to lengthen the wire to the loop.
• Refer also to the item about ASSEMBLING THE LOOP ANTENNA at
the LISTENING TO AM/FM RADIO section of the OPERATION page.
3 AUDIO 1-6/VIDEO 1-3/S-VIDEO 1-3
• These comprise the T 787's other sets of principal input. Connect
these audio and video input ports to corresponding output ports of
compatible source components such as DVD players, CD players or
cable/satellite boxes.
• AUDIO 5 and S-VIDEO 3 are the assigned default ports for the audio/
video output of the separately sold NAD IPD (NAD IPD Dock for
iPod) 1, NAD IPD 2 and later variants.
8 9
OUT 1 OUT 2
+12V TRIGGER
IN OUT 1 OUT 2 OUT 3 IN OUT 3
POWER
SWITCHED
ON
AC OUTLET 120V ~ 60Hz
120W 1A MAX
© NAD T 787
19
18 SWITCHED
AC OUTLET 230V ~ 50Hz
120W 0.5A MAX
230V VERSION ONLY