Pfaff performance 5.0 Owner's Manual page 63

To load the sequence touch OK in the top right
corner of the secuencing window. The sequence will
be loaded to sewing mode.
Note: You can also close sequencing by pressing the foot
control or by pressing the start/stop button.
In sewing mode it is possible to start sewing
anywhere in the sequence. Use the arrows to step
through the sequence.
If selecting another stitch in sewing mode and then
re-opening sequencing, your sequence will remain
unchanged. Every time sequencing is closed, the
sequence will be loaded to sewing mode.
Adjustments made in sewing mode will affect the
whole sequence. However, these changes will not
be saved if you return to sequencing. To adjust
individual stitches in the sequence, return to
sequencing.
Saving a sequence with your personal sequence
adjustments is made in sewing mode. Close
sequencing by touching OK in the top right corner
of the sequencing window.
Save the sequence by touching the save to personal
menu icon. You can scroll through the personal
arrows. Any box without a stitch is a free position
and can be used to save your new stitch. Simply
touch the position and your stitch is saved.
Any box with a stitch is an occupied position. You
can overwrite a previously stored stitch. Simply
touch the stitch to overwrite. A pop-up will ask
previously stored stitch. Cancel the saving process
by touching the cancel icon.
(A). A highlighted green delete symbol (B) will
appear at the lower right to indicate that delete is
active. Then touch the stitch you want to delete.
The positon will be emptied. To abort the deletion
before selecting a stitch, touch the delete icon again.
A long touch of the delete icon will empty the whole
subcategory selected.
Arrows (move cursor back
and forth in the sequence)
Save to personal menu
Scroll arrows
Cancel
Delete (A)
Delete symbol (B)
5:5