Stitch Positioning; Stitch Settings - Pfaff performance 5.0 Owner's Manual

Your machine will set the best settings for each
selected stitch. You can make your own adjustments
on the selected stitch. The setting changes will only
affect the selected stitch. Your changed settings will
be reset to default when selecting another stitch. The
changed settings are not automatically saved when
turning your machine off. You can save an adjusted
stitch in a personal menu to keep the adjustments.
For some stitches you can change more than one
setting in each setting control. This will indicate by
a button symbol in the middle of the control. Touch
the button symbol to toggle between different stitch
settings.
If a stitch can be balanced, a long touch symbol
appears in the lower right corner in the middle of
the control. Long touch the button symbol to open
balance setting.
Note: Some stitches can be balanced but not toggle
between two stitch settings (width/positioning) and/or
(length/density). If touching once on a button symbol
with a long touch the stitch control will not change its
appearance. This indicates that the selected stitch cannot
toggle between the two stitch settings.
Note: When trying to exceed minimum or maximum
settings for the stitch controls, a warning sound will be
heard. The default value is shown in white.
Stitch width
Increase or decrease the stitch width using + and -.
The number above the control shows stitch width in
mm.
For certain stitches the stitch positioning icon is
shown instead of the stitch width control. Use +
to move the needle to the right and - to move the
needle to the left. The number above the control
shows the needle position in mm in relation to
center needle position. For straight stitches the
machine has 37 needle positions.
It is possible to change the needle position of all
stitches that are less than 9 mm wide. Touch the
button symbol in the middle of width/position
control to toggle between stitch width and stitch
positioning. The stitch position can only be changed
to the limit of the maximum stitch width. Changing
the stitch position will also limit the stitch width
adjustment.
4:4
Stitch length/Stitch density
Stitch width/Stitch positioning
Button Long
symbol touch
Stitch width

Stitch positioning