TP-Link TD-W8961ND User Manual page 63

Step 2: Select the IP/MAC Filter Set Index and IP/MAC Filter Rule Index for the rule, then
Note:
If you want to make the rule take effect, please select Yes to active the rule.
Step 3: Enter the "MAC Address" and select the Unmatched rule as "Next".
Step 4: Finally, click the SAVE to save the entry.
Step 5: Go to Step 2 to configure the next rule: Block the PC with MAC address
Note:
After you complete the MAC filter rules for the example, the Filter list will show as follows. You can
enter the IP / MAC Filter Set Index to view the information about the rule.
Other operations for the entries as shown in Figure 4-39:
Select the IP / MAC Filter Set Index and IP/MAC Filter Rule Index to view or modify the entry.
Select the IP / MAC Filter Set Index and IP/MAC Filter Rule Index to locate the specific rule,
and then click the DELETE button to delete the entry.
4.5.2.3 Application Filter
Select Application Filter as the Filter type (shown in Figure 4-41), and then you can configure
the filter rules based on application.
Downloaded from www.Manualslib.com
TD-W8961ND
Select the "MAC" as the Rule Type on the Filter screen (show in Figure 4-40).
, Then you can configure the specific rule for the example.
select the Interface "PVC0", and select the Direction "Outgoing" for the first rule.
00:0A:EB:00:07:5F to access the Internet.
manuals search engine
300Mbps Wireless N ADSL2+ Modem Router User Guide
55