TP-Link TD-W8961ND User Manual page 19

300mbps wireless n adsl2+ modem router

Hide thumbs Also See for TD-W8961ND:

Table of Contents

Step 4: Configure the IP address as Figure 3-4 shows. After that, click OK.

Note:

You can

automatically" and "Obtain DNS server address automatically" in the screen above.

Now, you can run the Ping command in the command prompt to verify the network connection.

Please click the Start menu on your desktop, select run tab, type cmd or command in the field

and press Enter. Type ping 192.168.1.1 on the next screen, and then press Enter.

If the result displayed is similar to the screen below, the connection between your PC and the

Router has been established.

Downloaded from

www.Manualslib.com

TD-W8961ND

300Mbps Wireless N ADSL2+ Modem Router User Guide

configure the PC to get an IP address automatically, select "Obtain an IP address

manuals search engine

Figure 3-4

Figure 3-5

Table of Contents