Option Menu - Sharp Aquos LC-32M400X Operation Manual

Setup menu (Continued)
H 4:3 mode
The WSS signal has 4:3 auto-switching that allows
you to select between Panorama and Normal.
Selected item
Panorama Wide image without side bars.
Normal Normal range keeping 4:3 or 16:9 aspect
ratio.
WSS signal 4:3 screen
4:3 mode "Panorama"
H Quick start
You can reduce the TV's start-up time after turning
on the power with the remote control unit.
Selected item
On The TV quickly starts up from standby,
more of power consumption is required
during standby.
Off Power consumption is less than 1W.
H Text language
Select from among 3 kinds of language: West
Europe, Arabic, Farsi.
NOTE
• Teletext can display only when it is sent by a network. Not
used to convert between languages.
H Identification
You can check the current version of the software on
the screen.
H Reset
If complex adjustments are made and the settings
cannot be restored to normal, you can reset the
settings to the factory preset values.
NOTE
• If you execute "Reset", all the settings such as Picture,
Audio and Programme will be reset to the factory preset
values.
Description
4:3 mode "Normal"
Description

Option menu

Option
Input select
PC audio select
Output volume select
Auto volume
Digital audio output
Audio only
4
Game play time
4
Colour system
4
Fine sync.
DivX(R) Reg. Code
Version up
H Input select
For setting the signal type of external equipment.
Input source
INPUT4 Auto, S-VIDEO, VIDEO
H PC audio select
When using the INPUT 7 terminal or HDMI 1
terminal, you must select which terminal uses the
AUDIO IN (R/L) jack for analogue audio input.
Selected item
HDMI1 When connecting devices (including a
PC) with DVI/HDMI cable to the INPUT
1 terminal and inputting analogue audio
signals from the AUDIO IN (R/L) jack.
INPUT7(RGB) When connecting a PC to the INPUT 7
terminal, and inputting analogue audio
signals from the AUDIO IN (R/L) jack.
NOTE
• When connecting devices (including a PC) with digital
audio signal by using HDMI-certifi ed cable to INPUT 1
terminal, you must set to "INPUT7(RGB)". If "HDMI1" is
set, there will be no sound output.
H Output volume select
Allows you to select what controls the audio output.
Selected item
Fixed • Sound via speakers is adjusted with
VOL k / l on the remote control unit
or the TV.
• Sound via the AUDIO OUT terminal is
not adjustable and constantly outputs.
Variable • Sound via the AUDIO OUT terminal is
adjusted with VOL k / l on the remote
control unit or the TV.
• Sound via speakers is muted.
NOTE
• During "Output volume select" is set to "Variable", all Audio
menu item cannot be adjusted.
H Auto volume
Different sound sources, fairly often do not have the
same volume level, for example the changing from
movie to the advertisements. Auto volume solves this
problem and equalises the volume levels. (On, Off)
Digital setup
[HDMI1]
[Fixed]
[On]
[PCM]
Selectable item
Description
Description
15