Remote Vehicle Start - Chevrolet 2011 Traverse Owner's Manual

1. Separate the transmitter with a
flat, thin object, such as a flat
head screwdriver.
Carefully insert the tool
into the notch located along
the parting line of the
transmitter. Do not insert
the tool too far. Stop as
soon as resistance is felt.
Twist the tool until the
transmitter is separated.
2. Remove the old battery. Do not
use a metal object.
3. Insert the new battery, positive
side facing down. Replace with a
CR2032 or equivalent battery.
4. Snap the transmitter back
together.

Remote Vehicle Start

This vehicle may have a remote
starting feature that starts the
engine from outside of the vehicle.
(Remote Start): This button is
located on the RKE transmitter if the
vehicle has remote start.
Laws in some communities may
restrict the use of remote starters.
For example, some laws may
require a person using the remote
start to have the vehicle in view
when doing so. Check local
regulations for any requirements on
remote starting of vehicles.
Do not use the remote start feature
if the vehicle is low on fuel. The
vehicle could run out of fuel.
Keys, Doors and Windows
If the vehicle has the remote start
feature, the RKE transmitter
functions have an increased range
of operation. However, the range
may be less while the vehicle is
running.
There are other conditions which
can affect the performance of the
transmitter, see Remote Keyless
Entry (RKE) System on page 2 2 for
additional information.
Starting the Engine Using
Remote Start
To start the vehicle:
1. Aim the RKE transmitter at the
vehicle.
2. Press on the RKE transmitter.
3. Immediately after completing
Step 2, press and hold
the parking lamps flash. If the
vehicle's lights can not be seen,
press and hold
four seconds.
2-5
until
for at least