Krh Label - Sony Ericsson W960 Working Instruction, Mechanical

3.39 KRH Label

Follow the 2.1.1 Disassembly instructions!
• Read the old label and/or write the information into the
"Label make" program before removal
• Note the position of the label before removal
• Heat up the label by using hot air, if needed
• Carefully remove the label without causing scratches
• If there still are residues, clean the surface with isopropyl
alcohol
• Check that the proper label format is loaded in the Zebra
printer
• Write a new label by using the program "Label make"
and check that the printing is OK
• Take the new label and place it onto the frame as in the
adjacent picture
O
NE LABEL ONLY IS ALLOWED
Follow the 4.1.6 Reassembly instructions!
1206-4797 Rev1
©
Company Internal Sony Ericsson Mobile Communications AB
!
Working Instruction, Mechanical
55(64)