Table of Contents
Advertisement
Control panel
The control panel is located outside the refrigerator, above the ice
dispenser. It is used to control the fridge and freezer.
Switching on the appliance
o You switch on your appliance by connecting it to your mains
supply.
o When first turned on the appliance will automatically set the
fridge to 5°C, and the freezer to -18°C. You can set the
temperature in the fridge and freezer sections manually at any
time.
o NOTE: You can manually turn off the fridge section of the fridge-
freezer by pressing and holding the 'REF TEMP' button for 3
seconds. Press and hold the 'REF TEMP' button for 3 seconds to
turn the fridge section back on. The fridge will automatically turn
on to the temperature that was previously set.
o IMPORTANT: The ambient temperature of the room, the
temperature of food and the amount of food that has been
placed in the fridge freezer and how often the door is opened,
will all affect the temperature being maintained by the appliance.
Manually setting the fridge temperature.
o Press the 'REF TEMP' button once and the refrigerator icon will
start to flash. Then press the 'REF TEMP' button again to adjust
the temperature of the refrigerator.
o The temperature will change 1°C each time the 'REF TEMP'
button is pressed and will scroll through a range of 2°C - 8°C.
The chosen temperature will take effect after 5 seconds.
12
Advertisement
Table of Contents
