Advertisement
– Remove heater and all packaging materials
from the shipping carton.
Tip: Be sure to remove the handles and side
supports from the Styrofoam packaging
1. Align holes in heater leg frame with lower
inner bracket.
2. Attach lower outer bracket to lower inner
bracket using screws.
Align lower inner bracket with side support.
4. Attach side supports to heater using tilt
adjustment knob.
© 2014, Pinnacle Products International, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE
CONNECTED TO A POWER SOURCE
Tools Needed:
– Phillips Head screw driver.
– 7 mm open end wrench.
5. Slide side supports into upper brackets, align
holes and insert screws to tighten.
6. Slide upper handle brackets onto front
handle, align holes and insert screws to
tighten.
7. Slide rear handle into upper handle brackets,
align holes and insert screws to tighten.
6
Tip: Use a power screwdriver and
locking wrench for easier assembly.
Turbo Electric Fan Heater User's Manual
Advertisement
