Initial Setup - Axminster AWMS10 User Manual

If required at this stage, insert the work support rails (remember to insert right through to
the support brackets (See Fig 3). Clamp in position using the star head clamping bolts
(See Figs 4 & 4a). Extend the rear support bracket.
Well done, one mitre saw 'ready to go' .
Having unpacked your saw and its accessories please dispose of any unwanted packaging
properly. A lot of the packaging is biodegradable.
Clamping handle
Fig 1
Screw the clamping handle
bolt into the positioning arm
Fig 4
Star head clamping bolt
clamped to the support rail
Fig 4a
Star head clamping bolt
Positioning arm
FREEPHONE

Initial Setup...

Saw dust
collection bag
Attach the sawdust collection
bag to the dust extraction duct
Support
bracket
Rear support bracket
0800 371822
W
A X M I N S T E R
W H I T E
Fig 2
Work support rail
Fig 3
09