Initial Assembly - Axminster AWHBS350N User Manual

The saw table can be fitted without removing the blade, however, if you would feel more comfortable not
having to manoeuvre the table around the blade (the table is quite heavy), remove the blade by
opening the top and bottom covers, release the tension on the blade by backing off the tensioning wheel
Fig 1
Remove the fence rail and put safely aside
Fig 3
Remove the butterfly bolt & washer beneath the table, slide the blade through the table
slot & lower the table, guiding the threaded bolt through the hole in the tilt quadrent
housing.
Fig 4
Replace the butterfly bolt & washer you
removed earlier, and tighten.

Initial Assembly...

Remove the table stabilising bolt
& table insert
Replace the table stabilising bolt and
re-attach fence rail. Replace the table
insert.
Mounting the saw table
Fig 2
Fig 3a
Fig 5
W
A X M I N S T E R
W H I T E
11