Job Tracking Setting - Panasonic Panafax UF-8200 Operating Instructions Manual

Job Tracking Setting

This enables or disables Job Tracking. If Job Tracking is enabled, also set the type of log to record and the
Email address to which it is to be sent.
Note:
Before performing this setup, you fi rst need to register the destination Email address for the log in the Auto Dialers.
Furthermore, change the setting of the Fax Forward (Fax Parameter No. 54, FAX FORWARD) parameter to Invalid.
Set the POP Parameters so as to receive the emails automatically when using the Job Tracking function. Otherwise,
your machine cannot receive any emails.
Make sure that the Fax Parameters are NOT set as below.
Auto POP Receive (Fax Parameter No. 147) : Invalid
POP Timer (Fax Parameter No. 146)
When the User Authentication function is enabled, you must login to the machine to change settings. See the following
sections for details about how to login.
See "Administrator Login" on page 24 for Logging in as the system administrator.
See "Login Procedure" on page 8 for Logging in as a user.
The Job Tacking setting is cleared if the Authentication Setting of all functions is changed to Invalid.
Login to the machine, and then press
Enter Operator's ID Code, and then
Press , and then
Enable ("VALID") or disable ("INVALID") the Job Tracking function.
: Disables Job Tracking.
SET
: Enables Job Tracking.
SET
If you selected (VALID), next specify the type of log to record and the
Email address to which it is to be sent.
Select the type of log to record.
: (TX) Records sending only.
SET
: (RX) Records receiving only.
SET
: (TX&RX) Records sending and receiving.
SET
A prompt appears for entering the destination Email address.
Select the destination Email address to which to send the log from the
addresses previously set in the Auto Dialers.
20
: 0 minute
FUNCTION
.
SET
.
SET
KEY OPERATOR ID CODE
.
SET
ENTER ID=_
FAX PARAMETER(1-187)
131 JOB TRACKING
1:INVALID
JOB TRACKING=1
1:TX 2:RX 3:TX&RX
JOB TRACKING
ENTER ADMIN. ADDR
Panasonic User
panauser@pana.com
NO.=