Sending A Document Via Rightfax - Panasonic Panafax UF-8200 Operating Instructions Manual

Sending a Document via RightFax

When the RightFax server is used to send a fax, the following details are entered in the recipient (TO) fi eld and
sender (FROM) fi eld.
Field
Recipient
Station Name registered for One-Touch or ABBR. dialing. If manual number dialing is used, you
can enter the user name from the control panel.
Sender
When the user authentication is not enabled
Logo and Email Address of this device.
or
Name and Email Address selected with the Sender Selection function.
When the user authentication is enabled
Name of the authenticated user registered with the Windows Server.
Note:
RightFax Server is available in certain countries only.
Login, and then set document(s) on the ADF.
Note:
If you need to login, see "Login Procedure" on page 8 for details.
Specify the recipient.
Ex: 5551234
Note:
Quick Name Search dialing, One- Touch/ABBR. dialing, and Directory Search
dialing can be used to specify the recipient. For details, refer to the Operating
Instructions.
Press to scan the document, and then start sending.
START
If you press
SET
dialing, you can enter the recipient's name. (Up to 15 characters).
Continue following operation.
Enter the name, and then press
When you press
START
sending.
10
instead of when using manual number
START
.
SET
, the machine scans the document and starts
Content
ENTER STATION(S)
THEN PRESS START 00%
TEL. NO.
5551234
*STORE* NO. 001
PAGES=001 01%
ENTER NAME
1 STN(S) ARE SET
ADD MORE OR START
*STORE* NO. 001
PAGES=001 01%