Id Timeout Setting - Panasonic Panafax UF-8200 Operating Instructions Manual

ID Timeout Setting

If the ID Timeout Setting is set to "AUTO RESET TIME", authentication is cancelled if no operation is performed
on the machine for a specifi ed time period after performing authentication. The ID timeout period is set by the
"AUTO RESET TIME Setting" on page 16 .
Note:
When the User Authentication function is enabled, you must login to the machine to change settings. See the following
sections for details about how to login.
See "Administrator Login" on page 24 for Logging in as the system administrator.
See "Login Procedure" on page 8 for Logging in as a user.
Login to the machine, and then press
Enter Operator's ID Code, and then
Press , and then press
Select the ID Timeout setting.
: (AUTO RESET TIME) An authenticated user will be logged
SET
out if no operation is performed on the machine for a
specifi ed time after performing authentication.
: (AFTER EVERY JOB) An authenticated user will be logged
SET
out when the performing operation is completed.
Press to return to standby.
STOP
FUNCTION SET
.
SET
.
SET
KEY OPERATOR ID CODE
.
ENTER ID=_
FAX PARAMETER(1-187)
NO.=
127 ID TIMEOUT
1:AUTO RESET TIME
15