Function Setting; Settings; Initial Set - Kenwood KDC-MP245 Instruction Manual

Function Setting

Perform configuration for this unit. You can set up
the following functions.
1
Select a source
Press the [SRC] button.
Items to be displayed vary depending on the selected
source. Refer to the function list shown later.
2
Enter Function Setting mode
Press the [VOL] knob.
"FUNCTION" is displayed.
3
Select the Function item
Turn the [VOL] knob to display your desired item,
and then press the [VOL] knob.
Repeat the above operation to select the
function item to set.
Pressing the [ ] button allows you to go back
to the previous item.
4
Set the Function item
Turn the [VOL] knob to select your desired setting,
and then press the [VOL] knob.
5
Exit Function Setting mode
Press the [ ] button for at least 1 second.
Function item
Legend :
Function name: "Function name displayed on
No.
this unit" ➤ "
Setting 1"*, "Setting 2"...
The function related to the selected function item is
described. For where it appears, refer to the
the function list.
⁄
• The setting marked with * is a factory setting.
<SETTINGS>
¥ Clock Adjust: "CLOCK ADJ"
Sets the clock
1. Turn the [VOL] knob to adjust the hour.
2. Press the [VOL] knob to finish the hour
adjusting. The minute display blinks.
3. Turn the [VOL] knob to adjust the minute.
4. Press the [VOL] knob to finish the minute
adjusting.
ø Dimmer: "DIMMER SET" ➤ "ON","OFF"*
Adjusts the brightness of the display according to
the surrounding illumination.
π Text Scroll: "TEXT SCROLL" ➤ "AUTO"*,
"MANUAL"
8
|
KDC-MP245/ KDC-MP145
Scrolls the CD and audio file text display.
Selecting AUTO scrolls them automatically.
[ Seek Mode: "SEEK MODE" ➤ "AUTO1"*, "AUTO2",
"MANUAL"
Selects the tuning mode of the radio.
Tuning mode
Auto seek
Preset station seek
Manual
" Auto Memory: "AUTO MEMORY"
Memorizes six stations with good reception
automatically.
Selecting "YES" and then pressing the [VOL] knob
starts the auto memory operation.
⁄
• This setting can be made when "TYPE NORM" is selected
for the "Mixed Preset Memory Switching" item.
] Monaural Reception: "MONO SET" ➤
"ON","OFF"*
You can reduce the noise when stereo broadcasts
are received as monaural. (FM only)
' Name Set: "AUX NAME" ➤ "AUX"*, "DVD",
"PORTABLE", "GAME", "VIDEO", "TV"
Sets the display when switched to AUX source.
<INITIAL SET>
\ Mixed Preset Memory Switching: "PRESET
TYPE" ➤ "TYPE NORM"*,"TYPE MIX"
"TYPE NORM":
1 station can be assigned to 1 preset button in
each of 4 bands (FM1, FM2, FM3, and AM), i.e.,
No. given in
a total of 24 stations (6 stations x 4 bands) can
be preset.
"TYPE MIX":
A total of 6 stations can be assigned to a total
of 6 preset buttons regardless of band (FM1,
FM2, FM3, and AM). You can recall a preset
station without switching between bands.
« Beep: "KEY BEEP" ➤ "ON"*,"OFF"
Setting the operation check sound (beep sound)
ON/OFF.
Å Built in AUX: "BUILTIN AUX" ➤
"ON1"*,"ON2","OFF"
When this is set to ON, AUX source can be
selected.
ON1: Outputs the sound of external unit
ON2: Activates the attenuator function when
Display Operation
"AUTO1" Automatic search for a station.
"AUTO2" Search in order of the stations in
the Preset memory.
"MANUAL" Normal manual tuning control.
connected to the AUX terminal when
switched to AUX source.