Table of Contents
Advertisement
18
Cleaning Cylinder Fins
1. Remove engine cover (six screws), pull cover away from engine.
Clean cylinder fins to allow cooling air to pass freely.
EXHAUST SYSTEM
Spark Arrestor Screen
Level 2.
Tools required: Cross Head Screwdriver, 3 mm Hex Wrench,
Soft metal brush
Parts Required: Spark arrestor screen, Gasket
IMPORTANT
Carbon deposits in muffler will cause a drop in engine output and
overheating. Spark arrestor screen must be checked periodically.
1. Remove engine cover (six screws).
2. Remove exhaust deflector (A), spark arrestor cover (B), gasket (C),
and spark arrestor screen (D) from muffler. Replace screen if
plugged with carbon deposits.
NOTE
When cleaning carbon deposit, be careful not to damage the
catalytic element inside muffler.
3. Install spark arrestor screen, gaskets, and covers.
4. Install engine cover.
D
C
B
A
Hide quick links:
Advertisement
Table of Contents
