Exhaust System - Echo 06001247 Operator's Manual

Cleaning Cylinder Fins
1. Remove four 3 mm hex screws, side handle and recoil starter.
2. Remove engine cover (four screws), pull cover away from engine.
Clean cylinder fins to allow cooling air to pass freely.
3. Loosely reassemble engine cover then recoil starter and side
handle.
4. Tighten all screws securely.

EXHAUST SYSTEM

Spark Arrestor Screen
Level 2.
Tools required: Cross Head Screwdriver, 3 mm Hex Wrench, 25-50 mm
(1-2 in.) medium bristle brush
Parts Required: Spark arrestor screen P/N 14586240630,
(1 ea.) Gaskets P/N V104000030, V104000050
IMPORTANT
Carbon deposits in muffler will cause a drop in engine output and
overheating. Spark arrestor screen must be checked periodically.
1. Remove four 3 mm hex screws, side handle and recoil starter.
2. Remove engine cover (four screws), pull cover away from engine.
Clean cylinder fins to allow cooling air to pass freely.
S 'N' V
HRED
O ' M
PERATOR S
®
AC
19
ANUAL