System Verification; Other System Phones; Setting U P The Clock; Programming The Hour Format - GE 29488 User Manual

S V
YSTEM ERIFICATION
The following procedures should be used to test the system's configuration and identify possible line connection
errors. The phone must be connected to the AC power outlet, Line 1 must be connected to the LINE 1 + 2 jack, and
the phone must have a phone ID number.
VERY IMPORTANT: In order to achieve full system operation (i.e. intercom, page, etc.), Line 1 must be connected and
must be common to all phones connected to the system. Only other 29487 or 29488 models are compatible for full system
operation.
O S P
THER YSTEM HONES
1. Press LINE 1.
2. Look at all the other stations. If they all indicate line 1 is being used, the connection is correct.
OR
1. Press the INTERCOM button. The display shows INTERCOM and ENTER CALLING PHONE ID .
2. Enter a phone ID by pressing an Intercom/Memo Log button (1-16). The display shows the phone ID you entered.
If the phone ID you entered is connected to the system, you will hear a ring back tone (call through tone) at your
phone. If the phone ID is not connected to the system, you will hear an error tone. NO ANSWER shows in the
display and intercom is cancelled.
S U C
ETTING P THE LOCK
P H
ROGRAMMING THE
The clock is capable of being set to a 12- or 24-hour format. The default is 12-hour mode.
1. Press the MENU button.
2. Press the REVIEW down arrow button to scroll to SET ADVANCE FEATURE .
3. Press the SELECT button. SET HOUR FORMAT is displayed.
4. Press the SELECT button again.
5. Use the REVIEW up or down arrow button to select 12-HOUR or 24-HOUR .
6. Press the SELECT button to confirm.
S T
ETTING THE IME
1. Press the MENU button. SET TIME & DATE is displayed.
2. Press the SELECT button.
H
OUR
1. Use the REVIEW up or down arrow button to select the desired hour.
2. Press the SELECT button to confirm. You are now ready to select the minutes.
M
INUTES
1. Use the REVIEW up or down arrow button to select the desired minute.
2. Press the SELECT button to confirm. You are now ready to select the month.
M
ONTH
1. Use the REVIEW up or down arrow button to select the desired month.
2. Press the SELECT to confirm. You are now ready to select the date.
F
OUR ORMAT
9