Related Manuals for GE Feb-50
Summary of Contents for GE Feb-50
- Page 1 — —— —— — — — — — — —— —— —— —— —-— — —— ——— — —— —— — — —— —— — — —— —— — — —— —_—_ — —— — — — —- — — —...
- Page 2 BEFORE YOU BEGIN . . . The GE model 2-9450 is a multiple designed However, it is important Take a few minutes to read this material so that you thoroughly understand of your GE 2-9450 telephones. As you read the instructions...
- Page 3 Hold Conference Speakerphone LOCATION OF CONTROLS: 1.- Handset 2.- Handset Jack 3.- Coiled Cord 4.- Base Jack 5.- Telephone Line Cord 6.- Speaker 7.- Station Page Button 8.- Handset Hook 9.- Hook Switch 10.- Telephone Base Unit 11.- Memory Index Cover 12.- Quick Reference...
-
Page 4: Identify Your Existing Wiring System
Identify Your Existing Wiring System In order for you to properly connect your GE 2-9450 telephones isiting wiring system it is imperative tion. The following consist of either one or both types of standard telephone Single Line Jack; and the RJ14 Double Line Jack. Your system should match one of them. - Page 5 If you are installing new wiring and jacks. If the telephone wiring and modular jacks need to be installed, two-line RJ14 jacks at each telephone modates two telephone modular jacks will be needed for each telephone. LINE 1-2 LINE 3 LINE 4 RJ14 JACK...
-
Page 6: Plan Your Installation
Plan Your Installation Afier identifying plan you installation. Up to 16 GE 2-9450 telephones configuration. column). In the second column, write the location. “desk” or “wall” connected to that station. /mpoHant: proper operation. be connected name for each station. the system wiring, use the WORK SHEET to the right to... - Page 7 Station bcation Number No. 1 No. 4 No. 5 No. 6 No. 7 No, 9 No. 10 No. 11 No. 12 No. 13 No. 14 No. 15 Work Sheet ~nes be Connected ;:;=; Tel. 1 Tel. Tel. Tel. User’sName...
- Page 8 QUICK REFERENCE DEX CARD and the ACRYLIC D. Connect one end of a LONG TELEPHONE CORD to the jack on the back of the telephone Iabelied L/NE 1-2. Connect the other end to the jack(s) Iabelled 1. directly to the wall jack if it is a two-line RJ14 jack.
- Page 9 HANDSET in the cradle. G. Plug the AC POWER SUPPLY CORD into the jack on the telephone Iabelled DC 9V Thread the cord behind the STRAIN RELIEF. Plug the AC POWER SUPPLY into the nearest electrical H. After you plug in the AC POWER SUPPLY you should...
- Page 10 (St eps E through nection is made (Step M). Please follow these steps optional) in their proper sequence. The GE 2-9450 telephone an existing wall phone jack. A. Remove the clear ACRYL/C COVER that covers the MEMORY MEMORY INDEX CARD REFERENCE B.
-
Page 11: On The Handset
AC POWER CORD through the CHANNEL on the back of the BACK COVER PLATE so that the cords are taut at the top of the telephone. (attach the BACK COVER PLATE to the BASE so that the narrow end is at the top of the telephone). - Page 12 To turn a ringer back on: See page 23 of the accompanying USE AND CARE GUIDE. Note: For complete information GE Model 2-9450 telephone, your USE AND CARE GUIDE. LED flash red and above to INDEX. The phone will red as it...
-
Page 13: System Verification
System Verification Problem? Check the following “HELP” number at 800-448-0329 The following identify possible system connection nected to the AC power supply, lines 1 and 2 must be connected line 1, 2 jack, and the phone must have been programmed com station address. -
Page 14: Troubleshooting
Is AC power supply plugged outlet and the back of the telephone. Intercom Station needs to be programmed. Press Intercom station address button. Check that lines 1 and 2 are properly con- nected to the telephone. - Page 15 Telephone Company? Try dialing with the switch in each position. This is normal during pulse dialing as the phone pulses the line to tell the telephone office what number Is the handset cord inserted securely to the handset and telephone? Is Mute on? Check volume control setting.
-
Page 16: Fcc Registration Information
The REN is useful to determine the number of devices you may connect to your telephone hne and still have all these devices rmg when your telephone number is called. In most (but not all) areas, the sum of the REN’s of all devices connected to one Ilne should not exceed 5.