Denso BHT-8000 User Manual page 8

• Use the dedicated AC adapter* only.
Failure to do so could result in fire.
• Never use the CU on the line voltage other than the specified level.
Doing so could cause the CU to break or burn.
• If the power cord of the AC adapter* is damaged (e.g., exposed or broken lead wires), stop
using it and contact your nearest dealer.
Failure to do so could result in a fire or electrical shock.
Handling the battery cartridge
• Load a rechargeable battery cartridge in the correct direction.
Failure to do so could cause the battery cartridge or BHT to generate
heat or smoke.
• Never charge a wet or damp rechargeable battery cartridge.
Doing so could cause the batteries to break, generate heat, rupture or burn.
Handling the BHT
• Never put the BHT in places where there are excessively high temperatures, such as inside
closed-up automobiles, or in places exposed to direct sunlight.
Doing so could affect the housing or parts, resulting in a fire.
• Avoid using the BHT in extremely humid or dusty areas, or where there are drastic
temperature changes.
Moisture or dust will get into the BHT, resulting in malfunction, fire or electrical shock.
• Never disassemble or modify the BHT; doing so could result in an accident such as break or
fire.
• If smoke, abnormal odors or noises come from the BHT, immediately turn off the power, pull
out the battery cartridge, and contact your nearest dealer.
Failure to do so could cause smoke or fire.
• If foreign material or water gets into the BHT, immediately turn off the power, pull out the
battery cartridge, and contact your nearest dealer.
Failure to do so could cause smoke or fire.
vi
*Not available to the CU-8002.
Never
disas-
semble