Displaying The Cu System Information On The Bht; Updating The Cu System Program Via The Bht - Denso BHT-8000 User Manual

5.6.2 Displaying the CU System Information on the BHT

You may display the CU-8011 system information on the BHT's LCD.
Set the BHT on the CU-8011 and operate the BHT to display the SYSTEM INFORMATION screen on
the LCD. From that screen, you may call up the system program version and MAC address.
For details about the displaying procedure of the CU system information, refer to Chapter 2, Section
2.5.3, "[ 6 ] System Information."

5.6.3 Updating the CU System Program via the BHT

You may update the CU-8011 system program by using the BHT.
(1) Downloading the CU-8011 system program file
Download the CU-8011 system program file to the BHT from the host PC.
(2) Updating the current CU-8011 system program
Set the BHT on the CU-8011 whose system program should be updated. Operate the BHT to
display the CU-F/W MODIFY screen where you may update the system program.
During updating, the POWER LED on the CU-8011 will flash. (Refer to the Section 5.6.1.)
For details about the updating procedure, refer to Chapter 2, Section 2.6.2, "Updating the CU-8011
System."
Chapter 5 Handling the CU-8000 (Option)
167