MSI KM2M Combo User Manual page 64

Power Off
Power On
Last State
IRQ/Event Activity Detect
Press <Enter> to enter the sub-menu and the following screen appears:
PS2KB Wakeup Select, PS2KB/MS Wakeup from S3/S4/S5, USB
Resume from S3, VGA, LPT & COM, HDD & FDD, PCI Master,
Wake Up On PME, Wake Up On Ring
These fields specify whether the system will be awakened from power
saving modes when activity or input signal of the specified hardware
peripheral or component is detected.
MSI Reminds You...
You need to install a modem card supporting power on function
for "Wake Up On Ring" function.
Resume By Alarm
This is used to enable or disable the feature of booting up the system on
a scheduled time/date from the S3/S4/S5 state. Settings: Enabled,
Disabled.
Leaves the computer in the power off state.
Leaves the computer in the power on state.
Restores the system to the status before power failure
or interrupt occurred.
BIOS Setup
3-23