IBM 21Y Maintenance Manual page 143

Error
Code/Symptom
001-250-000
(Failed System
Board ECC)
001-250-001
(Failed System
Board ECC)
005-XXX-000
(Failed Video test)
011-XXX-000
(Failed COM1
Serial Port test)
011-XXX-001
(Failed COM2
Serial Port test)
014-XXX-000
(Failed Parallel
Port test)
015-XXX-001
(USB interface not
found, board
damaged)
015-XXX-015
(Failed USB
External Loopback
test)
015-XXX-198
(USB device
connected during
USB test)
020-XXX-000
(Failed PCI
Interface test)
030-XXX-000
(Failed Internal
SCSI interface
test)
030-XXX-00N
(Failed SCSI test
on PCI slot N.
Check system
error log before
replacing a FRU.)
035-XXX-099
134
Netfinity 3500-M20 – Type 8657 Models 21Y, 22Y, 31Y, 32Y,
FRU/Action
1. System Board
1. System Board
1. Video Adapter (if installed)
2. System Board
1. System Board
1. System Board
1. System Board
1. System Board
1. Make sure parallel port is not
disabled
2. Re-run USB External
Loopback test
3. System Board
1. Remove USB devices from
USB1 and USB2
2. Re-run test
3. System Board
1. System Board
1. System Board
1. Adapter in Slot N
1. No adapters were found.
2. If adapter is installed re-check
connection.