Adjusting The Torque Of The Coarse Focus Knob; Photomicrography And Tv Microscopy; Cord Hangers - Nikon eclipse e100 Instructions Manual

Adjusting the Torque of the Coarse Focus Knob

The tension (torque) of the coarse focus knob
rotation can be adjusted. To increase the
tension, turn the coarse focus knob torque
adjustment ring counterclockwise. The torque
Loosens.
adjustment ring is located at the back of the
coarse focus knob. To decrease the tension,
turn the ring clockwise. Do not decrease the
tension too much. If it is too loose, the stage
Tightens.
will fall under its own weight.

Cord Hangers

Push the cord hangers (optional) into the holes
on the rear of the microscope. The hangers
Cord hangers
can be used for winding the power cord
around when the microscope is not in use.
To remove the hangers, use a screwdriver.
24