Section 3 - Configuration
Web-based Configuration Utility
This section will show you how to configure your D-Link wireless access point using the web-based configuration utility.
If you wish to change the default settings or adjust the
configuration of the DAP-1650, you may use the web-based
configuration utility.
To access the configuration utility, open a web browser
such as Internet Explorer and enter http://dlinkap.local
in the address field.
Select Admin from the drop-down menu and then enter
your password. Leave the password blank by default.
If you get a Page Cannot be Displayed error, please refer to
"Troubleshooting" on page xc for assistance.
D-Link DAP-1650 User Manual
17