Configuration; Web-Based Configuration Utility - D-Link DAP-1360 User Manual

Section 3 - Configuration

Configuration

This section will show you how to configure your new D-Link wireless access point using the web-based configuration
utility.

Web-based Configuration Utility

If you wish to change the default settings or optimize
the performance of the DAP-1360, you may use the
web-based configuration utility.
To access the configuration utility, open a web browser
such as Internet Explorer and enter dlinkap or
192.168.0.50 in the address field.
Type Admin and then enter your password. Leave the
password blank by default.
If you get a Page Cannot be Displayed error, please
refer to the Troubleshooting section for assistance.
D-Link DAP-1360 User Manual 20