Web-Based Setup - D-Link DAP-1325-US User Manual

Section 3 - Configuration
To access the setup utility for the DAP-1325 AC1200 Wi-Fi Range Extender with
Power Passthrough on your PC, first connect to the DAP-1325 wirelessly using the
Wi-Fi name (SSID) and password located on your Wi-Fi Configuration Card. Then
open a web browser and enter http://dlinkap.local./ in your browser's URL field.
You may also enter the IP address* of the DAP-1325.
Note: Web browser configuration is not supported for Android Devices. Please
use the QRS Mobile Application to configure your device.
* The default IP address is 192.168.0.50. Once your DAP-1325 connects to the host network,
it will be assigned a new IP address based on your network's DHCP settings. You will need
to log in to your router to see what IP address is assigned to your DAP-1325.
For multiple DAP-1325s, go to http://dlinkapxxxx.local. as shown on the included Wi-Fi
Configuration Card, with "xxxx" being the last four digits of the DAP-1325's MAC address.
Enter your password. By default, Admin is the username and cannot be changed,
and by default, the password is blank.
The configuration interface will open, and you can configure the various settings
for the DAP-1325. If you have not yet configured an uplink network, the home
screen will show that there is no connection between the DAP-1325 and the
uplink router.
D-Link DAP-1325 User Manual

Web-based Setup

17