Disassembly For Repair - Kenwood TK-3180 Service Manual

Uhf fm transceiver

Hide thumbs Also See for TK-3180:

Function reference (182 pages)

Service manual (55 pages)

Manuale di istruzioni (50 pages)

Table of Contents

REALIGNMENT / DISASSEMBLY FOR REPAIR

3. How to enter the password with the keypad;

If you press a key while "CLONE LOCK" is displayed, the

number that was pressed is displayed on the transceiver.

Each press of the key shifts the display in order to the left.

When you enter the password and press the [✳] or [S] key,

"CLONE MODE" is displayed if the entered password is

correct. If the password is incorrect, "CLONE LOCK" is

redisplayed.

How to enter the password with the encoder;

If the encoder is rotated while "CLONE LOCK" is dis-

played, numbers (0 to 9) are displayed flashing. When you

press the [C] key, the currently selected number is deter-

mined. If you press the [S] key after entering the pass-

word in this procedure, "CLONE MODE" is displayed if

the entered password is correct. If the password is incor-

rect, "CLONE LOCK" is redisplayed.

4. Power on the slave transceiver.

5. Connect the cloning cable (part No. E30-3325-05) to the

universal connectors on the master and slave.

6. Press the [S] key on the master while the master displays

"CLONE MODE". The data of the master is sent to the

slave. While the slave is receiving the data, "PROGRAM"

is displayed. When cloning of data is completed, the mas-

ter displays "END", and the slave automatically operates

in the User mode. The slave can then be operated by the

same program as the master.

7. The other slave can be continuously cloned. When the [S]

key on the master is pressed while the master displays

"END", the master displays "CLONE MODE". Carry out

the operation in step 4 to 6.

Notes:

Can not be cloned if the password (over write password)

is programmed to the slave.

Only the same models can be cloned together.

Fig. 2

8. Firmware Information Mode

Turn the transceiver ON with the [Side1] switch held

down. Then, the version is displayed during holding the

[Side1] switch.

Cloning cable

(E30-3325-05)

9. Clock Adjustment Mode

9-1. Flow chart of operation

[C] + Power ON

YEAR

[S]

MONTH

[S]

DAY

[S]

HOUR

[S]

MINUTE

[S]