GAS GAS EC 125 Racing 2013 User Manual page 57

CONFIGURATION
Set Danger Temperature
Warning
When programmed engine temperature is reached, the red warning
led will turn on. The warning will be disabled if the value is 0.
Change the blinking digit with the left button
Change to next digit usingthe buttonn
To confirm press the buttonn
Set High Temperature Warning
When programmed engine
temperature is reached, the amber
warning led will turn on.
The warning will be disabled if the
value is 0.
Change the blinking digit with the
left button
Change to next digit using
the button
To confirm press the button
NOTE: engine temperature sensor
is optional and is not available in
GAS GAS.
57
- -
Set Maintenance Reminder
When programmed kilometers or
miles are reached, the maintenance
reminder icon will turn on.
Change the blinking digit with the
left button
Change to next digit using
the button
To confirm press the button
NOTE: the oil and maintenace
reminders must be manually reset
by entering them again in the
configuration mode.