Turning The Radio On/Off - Motorola GM1200 Series User Manual

Turning the Radio ON/OFF

Key click:
Fail tone:
Note:
In the following pages two types of radio display
examples will be shown :
K8
TEXT 213
Turning the Radio ON/OFF
Turn the radio on by pressing the combined ON/
OFF/VOLUME control (1). The radio then enters a
self test routine. During the test the display will be
activated, the self test tone will sound, and the LED
will light green. If the radio fails the self test a
continuous low tone will sound and the display will
show a fault code, e.g. "02":
K8
RADIO FAULT 02
until the radio is turned off by pressing the control
(1) again.
4 Turning the Radio ON/OFF
English
Confidence tone when
any key pressed/speech
limitation warning.
Hardware error/call
timed out (conventional
mode).
K4
TEXT
K4
ERR 02
Note:
If the radio fails the self test routine, consult your
dealer.
When the self test is complete the radio will display:
K8
TEXT 213
where "213" is the identity of the radio.
After this text has been displayed, the radio will scan
for system access with the LED flashing GREEN
and the scanning icon
When a control channel is acquired, the green LED
will go off and the scanning icon
by the registered icon
Use the combined ON/OFF/VOLUME control (1) to
adjust the volume to a comfortable listening level.
K4
TEXT
followed by
213
lit.
will be replaced
.