Table Of Contents; Introduction - Gravely Promaster 250Z 992018 - PM 260Z Owner's/Operator's Manual

Controls and Features . . . . . . . . . . . . . . . . . . . . . .3
Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
THE MANUAL
Before operation of unit, carefully and completely read
your manuals. The contents will provide you with an
understanding of safety instructions and controls during
normal operation and maintenance.
All reference to left, right, front, or rear are given from
operator sitting in the operation position and facing the
direction of forward travel.
SERVICE AND
REPLACEMENT PARTS
When ordering publications,
Transfer
replacement parts, or making service
model & serial
inquiries, know the Model and Serial
number
label from
numbers of your unit and engine.
product
registration
Numbers are located on the product
here.
registration form in the unit literature
package. They are printed on a serial
number label, located on the frame of
your unit (Figure 2).
• Record Unit Model and Serial numbers here.
• Record Engine Model and Serial numbers here.
Serial Number Label
Figure 2

TABLE OF CONTENTS

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Attachments and Accessories . . . . . . . . . . . . . . 25
Maintenance Schedule . . . . . . . . . . . . . . . . . . . . 23
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Warranty . . . . . . . . . . . . . . . . . . Inside Back Cover

INTRODUCTION

PRODUCT REGISTRATION
A warranty card must be filled out, signed, and returned
at time of purchase. This card activates the warranty.
Claims meeting requirements during limited warranty
period will be honored. Return your registration card to
assure warranty service.
UNAUTHORIZED REPLACEMENT PARTS
Use only Gravely replacement parts. The replacement of
any part on this equipment with anything other than a
Gravely authorized replacement part may adversely
affect the performance, durability, and safety of this unit
and may void the warranty. Gravely disclaims liability for
any claims or damages, whether regarding warranty,
property damage, personal injury or death arising out of
the use of unauthorized replacement parts.
DISCLAIMER
Gravely reserves the right to discontinue, change, and
improve its products at any time without public notice or
obligation to the purchaser. The descriptions and
specifications contained in this manual were in effect at
printing. Equipment described within this manual may
be optional. Some illustrations may not be applicable to
your unit.
DEALER DELIVERY
Dealer should:
1. Test brakes (See Operation Section) after tractor is
assembled to be sure adjustment has not been
disturbed in shipment (See Adjustment Section).
Wheel brakes are properly adjusted at factory.
2. Check the safety interlock system to make sure that
it is functioning properly. With operator on seat, unit
must not start unless Speed Selector is in neutral
(N) and Implement Power disengaged (Off). Engine
must stop if operator leaves seat when Speed
Selector is in any drive position or with Implement
Power engaged (On). Refer to Adjustment Section.
3. Fill out Original Purchaser Registration Card and
return the card to Gravely.
4. Explain Gravely Limited Warranty Policy.
OC0191
GB - 5
Copyright 2000