Table of Contents
Advertisement
SOME MODELS
To select a pile height setting:
Turn off cleaner. Select a pile height setting
by tilting the cleaner back until front wheels
are lifted slightly off the floor as illustrated.
Slide the adjustment lever to the correct
setting,
Models with no selector
adjust automatically
for varying carpet heights.
SUGGESTED
PILE HEIGHT SETTINGS
You may need to raise the height to make
some jobs easier, such as scatter rugs and
longer pile carpets.
Suggested
settings
are:
HIGH: shag carpet, long pile, plush, scatter
rugs
MED: medium to long pile.
LOW: short to medium pile.
EX LOW: very low pile.
Ensure
ON-OFF
switch is OFR Plug the
Place unit in "HIGH" when
using attach-
ments
to prevent possible floor damage.
ATTENTION:
Special care is required when
vacuuming
certain types of carpet or floor
covering. Always check the carpet or floor
covering manufacturer's
recommended
cleaning instructions
before vacuuming.
Pile Height --X
_
Adjustment
\._._
_
J
LI
WARNING
Personal Injury
Hazard
To avoid personal injury, DO NOT
place hands or feet underneath
the
unit when changing
height setting.
power cord into 120V outlet. ON position
turns vacuum on. OFF position turns
vacuum off.
Switch
Release the handle by pressing down on
the handle release pedal with your foot and
pulling back and down on the handle with
your hand.
6
Advertisement
Table of Contents
