Advertisement
Electrical
Shock
and Personal
Injury Hazard
Disconnect
electrical
supply
before
servicing
or cleaning
the unit.
Failure
to do so could
result
in electrical
shock
or
personal
injury
from vacuum
cleaner
suddenly
starting.
TO REMOVE LIGHT BULB
1. Disconnect power cord from electrical outlet
2. Press handle release pedal and lay
vacuum
cleaner
back.
3, Remove the two
(2) screws from the
lens cover.
4. insert flat blade of
screwdriver
into slot
at top of the lens.
Lift the lens cover to
remove.
Gather the cord and wrap it loosely around
CAUTION
Do not use a bulb rated over 9W
(13V).
During extended
use, heat
from the bulb could overheat
surrounding
plastic
parts.
5. Pull bulb out of
socket.
Do NOT
_
wist, Gently
push
replacement
bulb into
/
socket to replace,
'AI
6. Snap lens cover
back into place and
secure the headlight
lens by replacing
the
two screws°
Note: See separate
PARTS
LIST for bulb
number.
the upper and lower cord hooks. Lock
power cord plug onto the power cord°
Store the vacuum
cleaner in a dry,
indoor area, on the
floor with the handle
locked in the upright
position.
rl
WARNING
Electrical
Shock
and Personal
Injury Hazard
Wrapping
the cord
too tightly
puts stress
on the cord
and can
cause
cord damage.
iii ii iiiiiiiiii
i
i
14
Advertisement
