Instrument Cluster
Settings
In this mode, you can configure different driver setting choices. Press
the right arrow key (when in the Settings menu) to reach the listed
modes below:
Note: Some items are optional and may not appear.
Traction Control
Blind Spot
Collision Warning Sensitivity (if
Cross Traffic
Alert
Cruise Control
Rear Park Aid
Trailer Sway
Autolamp Delay
Easy Entry/Exit
Fuel
Locks
Menu Control
Oil Life Reset
Power Liftgate
40
2011 Explorer (exp)
Owners Guide, 1st Printing
USA (fus)
Driver Assist
On / Off
On (default on key cycle) / Off
High / Normal / Low
MyKey™ is
programmed)
Chimes
On (default on key cycle) / Off
Warn-<ON>
On (default on key cycle) / Off
On (default on key cycle) / Off
Adaptive or Normal
On (default on key cycle) / Off
On (default on key cycle) / Off
Vehicle
Off, 10 / 20 (default setting) / 30 / 60 / 90 / 120 /
180 seconds
On (default on key cycle) / Off
DTE Calculation Normal or Towing
Long Term Econ Hold OK to Reset...
Autolock,
On (default on key cycle) / Off
Autounlock
On (default on key cycle) / Off
Remote
All doors / Driver's door
Unlocking
Standard / Memory On
Set to 10–100%
Enable / Disable