Ford 2011 Explorer Owner's Manual page 34

Instrument Cluster
HILL DESCENT CONTROL ACTIVE (if equipped) — Displayed
when hill descent control mode becomes active.
HILL DESCENT CONTROL FAULT (if equipped) — Displayed when
a hill descent system fault is present.
HILL DESCENT CONTROL OFF (if equipped)— Displayed when hill
descent control mode becomes inactive.
HILL DESCENT CONTROL OFF SYSTEM COOLING (if equipped)
— Displayed when hill descent control mode is disabled to cool the
brake system.
HILL DESCENT CONTROL READY (if equipped) — Displayed
when hill descent control mode is ready.
MODE CHANGE NOT ACCEPTED, RETRY (if equipped) —
Displayed when hill descent control mode cannot be changed at time of
driver request.
OFF ROAD MODE ENABLED (if equipped) — Displayed when off
road mode becomes active.
TERRAIN MANAGEMENT MUD, RUT MODE (if equipped) —
Displays driver selected terrain management mode.
TERRAIN MANAGEMENT NORMAL MODE (if equipped) —
Displays driver selected terrain management mode.
TERRAIN MANAGEMENT SAND MODE (if equipped) — Displays
driver selected terrain management mode.
TERRAIN MANAGEMENT SNOW MODE (if equipped) — Displays
driver selected terrain management mode.
TERRAIN MANAGEMENT SYSTEM FAULT (if equipped) —
Displays when the terrain management system detects an error.
TO STOP ALARM START VEHICLE — Displayed when the perimeter
alarm system is armed and the vehicle is entered using the key on the
driver's side door. In order to prevent the perimeter alarm system from
triggering, the ignition must be turned to start or on before the
12 second chime expires. See Perimeter alarm system in the Locks and
security chapter.
TRAILER SWAY REDUCE SPEED (if equipped)— Displayed when
the trailer sway control has detected trailer sway. For more information,
refer to the Driving chapter for more information.
TRANSPORT MODE CONTACT DEALER — Contact your authorized
dealer as soon as possible.
33
2011 Explorer (exp)
Owners Guide, 1st Printing
USA (fus)