Ford 2011 Explorer Owner's Manual page 107

Driver Controls
Using adaptive cruise control
Note: It is the drivers responsibility to stay alert, drive safely and be in
control of the vehicle at all times.
The controls for using your cruise
control are located on the steering
wheel.
SET: Press to set a speed or to
change the set speed.
RES/CNCL (Resume/cancel):
Press to resume or cancel a set
speed.
ON/OFF: Press to turn the system
on or off.
GAP: Press to change the distance between your vehicle and the vehicle
in front of you.
Setting adaptive cruise control
1. Press and release ON. The
message center will display the
gray ACC indicator light, current
gap setting and SET.
2. Accelerate to the desired speed.
3. Press SET upward and release.
The vehicle speed will be stored in the memory and the message center
will display a green
desired set speed.
4. Take your foot off the accelerator pedal.
5. A lead vehicle graphic will
illuminate if there is a vehicle
detected in front of you.
106
2011 Explorer (exp)
Owners Guide, 1st Printing
USA (fus)
SET
ACC indicator light, current gap setting and
RES
CNCL
GAP
ON
OFF