Kenmore 11 Owner's Manual page 6

Electrical Shock Hazard
DO NOT plug into electrical supply
until assembly Is complete. Failure
to do so could result in electrical
shock or injury.
Before assemblingvacuum, check the
PACKING LIST on the cover of the separate
Repair Parts List.Use this listto verifythat
you have received all the componentsof
your new Kenmorevacuum.
WAND -TELESCOPING
Wand
Length
Adjust
Button
The wand length
6, is adjustable
="=.- and requires no
assembly. To
Hand adjust, simply
Above push down on
This the wand adjust
Tab button and slide
the upper wand
_lr to the desired
height.
The swivel,
located on the
Power-Mate ® ,
allows you to
turn the handle
to the left side to
reach farther
under low furni-
ture.
!
When adjusting the wand length you may
have to hold the Power-Mate ® with your hand
or foot.
POWER-MATE ®
Insert wand into Power-Mate ® until the wand
button snaps into place.
Handle
Handle
Quick
Release
Button
Telescoping
Wand
-- Wand Length
Adjust Button
: _--_ Wand
Button
Wand Quick
lease Pedal
6