Belt Changingand Agitator Cleaning - Kenmore 11 Owner's Manual

1. Remove Power-Mate ® cover as shown in
BELT CHANGING AND AGITATOR CLEAN-
ING section.
--_Pushln I
2. Push in and turn
bulb counterclock-
wise, then pull out
to remove.
I I
And Turn I I
3. Push in and turn
bulbclockwise,to
replace. Bulb must
not be higherthan
15 Watts(130 Volts).
4. Reinstall Power-Mate ® cover as shown in
BELT CHANGING AND AGITATOR CLEAN-
ING section.
NOTE: See PARTS AND FEATURES for
bulb number.
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
servicing or cleaning the unit.
Failure to do so could result in elec-
trical shock or personal injury from
cleaner suddenly starting.
TO CHECK AGITATOR
ASSEMBLY
When brushes
_---" ____ _}r[--__ are worn to the
level of the base
support bars,
replace the
agitator
assembly.
Base Support Bars
TO REPLACE AGITATOR
ASSEMBLY
1. Remove Power-Mate ®cover, belt and
agitator assembly. See "To Remove Belt"
in BELT CHANGING AND AGITATOR
CLEANING.
2. Replace Agitator
3. Replace belt, agitator assembly, Power-
Mate"cover, light bulb and light cover.
See "To replace belt" in BELT CHANGING
AND AGITATOR CLEANING.
18