To Allocate The Minute Minder To A Cooking Zone - Miele KM 3034 Operating And Installation Instructions

To allocate the minute minder to a cooking zone

A minute minder can be set for each active cooking zone.
All cooking zones can be programmed at the same time.
^ Switch on the required cooking zone.
^ Touch the m sensor.
00 flashes in the timer display, and the minute minder
indicator light will flash.
^ Touch the m sensor again.
The indicator light for the minute minder in the timer display
goes out, and an indicator light for the relevant cooking zone
will flash.
^ If several cooking zones are being used, touch the m
sensor repeatedly until the indicator light flashes next to the
cooking zone which you wish to use, e.g. back right.
The indicator lights for the cooking zones being used light up
anti-clockwise, starting with the front right.
^ Touch the - or + sensor until the time you require appears
in the display, e.g. 15 minutes.
The time then counts down in minutes. The time remaining
can be seen in the display.
Repeat the process if you wish to set a minute minder for
another cooking zone.
If more than one switch-off time is programmed, the shortest
time remaining will appear in the display, and the indicator
light for that particular cooking zone will flash. All the other
indicator lights will light up constantly. If you want to check on
the remaining time, touch the m sensor until the indicator
light for the zone you require flashes.
Minute minder
25