Easy Switch-Off Function; In-Operation / Residual Heat Indicator Light - Miele KM 3034 Operating And Installation Instructions

Easy switch-off function

In-operation / Residual heat indicator light

Touching the easy switch-off sensor f switches off all active
burners.
^ Touch the f sensor.
The in-operation / residual heat indicator light for the active
burners is flashing.
A minute minder time counts down if it is not set to a specific
cooking zone.
If the minute minder is set to a cooking zone, it will be
cancelled.
The indicator light for the easy switch-off function remains
illuminated until all active burner control knobs are turned to
"ß"
The in-operation / residual heat indicator light illuminates as
soon as a cooking zone is switched on and remains lit up
during operation. If the appliance is switched off, the
indicator light will go out briefly, but then come on again as
long as there is residual heat.
Do not touch or place any heat sensitive objects on the
gas cooktop while the residual heat indicator light is still
on. Danger of burning!
If the indicator lights are flashing, this shows there is a fault.
See section "Problem solving guide".
Operation
23