Installation - Miele KM 3034 Operating And Installation Instructions

^ Make the worktop cut-out for one or
more appliances as applicable.
Remember to maintain a minimum
safety distance (see "Safety
instructions for installation").
^ Seal the cut surfaces with a suitable
heat-resistant sealant to avoid
swelling caused by moisture.
Make sure these materials do not
come into contact with the surface of
the worktop.
^ Feed the connection cable down
through the cut-out.
^ Place the cooktop in the cut-out
without securing it.
If, during installation, you find that the
seals on the corners are not flush
with the worktop, the corner radii ß
R4, can be carefully scribed to fit.
^ Connect the cooktop to the mains
(see "Electrical connection").
^ Connect the appliance to the gas
supply (see "Gas connection").
^ Secure the appliance using the
brackets a supplied.
After installation
Ignite all the burners to check that they
are operating correctly.
The flame must not go out on the lowest
setting, or when the control is turned
quickly from the highest to the lowest
setting.
On the highest setting, the flame must
have a distinctive and visible core.

Installation

43