Country Selection - Note For Ap & Wireless Controller; Frequency Of Operation - Fcc And Ic - Extreme Networks Altitude 4511 Installation Manual

Hide thumbs Also See for Altitude 4511:
Table of Contents

Advertisement

Chapter 5: Regulatory Information
NOTE
Note: For 2.4GHz or 5GHz Products: Europe includes, Austria, Belgium, Bulgaria, Czech
Republic, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovak Republic, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
Operation of the device without regulatory approval is illegal.
Country Selection – Note for AP & Wireless Controller
Select only the country in which you are using the device. Any other selection will make the
operation of this device illegal. The US version of the Access Point will only have US listed
in the country selection table. The US version will be sold / used in the US protectorates:
American Samoa, Guam, Puerto Rico, US Virgin Islands.
Frequency of Operation – FCC and IC
The use on UNII (Unlicensed National Information Infrastructure) Band 1
5 GHz Only.
5150-5250 MHz and Band 3 5470 - 5725 MHz is restricted to indoor use only, any other use
will make the operation of this device illegal.
Devices using the 5470 – 5725 MHz band shall not be capable of transmitting in the band
5600 - 5650 MHz in the US, this "Notched" band has been disabled in the US version of the
Access Point.
2.4 GHz Only.
The available channels for 802.11 b/g operation in the US are Channels 1 to
11. The range of channels is limited by firmware.
44
Altitude™ 4511 Access Point Installation Guide

Advertisement

Table of Contents
loading

Table of Contents