Usb Driver Un-Installation - Icom id- rp4000v Instruction Manual

4
DRIVER INSTALLATION
n USB driver un-installation
IMPORTANT!
As described at first of this section, USB driver is in-
stalled for each unit and connector.
However, only one USB driver can be un-installed
when using "Add and Delete" included in OS. So,
you should perform the USB driver un-installation
with the following instructions.
Click
Double click
Click
Click
Un-install the USB drivers as follows.
In this section, describes the un-installation instruc-
®
tion with Microsoft
q Start up Windows.
w Insert the CD that supplied with the ID-RP4000V
into the CD drive.
e Open the CD drive directory using "My Computer"
or "Explorer."
• Contents of the CD are displayed.
r Double click the "Driver" and then the appropriate
folder for your OS to open and display the folder
contents.
t Run the appropriate 'exe' file according to the OS.
• For Windows XP/2000 : "ICOM_UNIN_NT.EXE"
• For Windows 98SE/Me : "ICOM_UNIN_9x.EXE"
y The un-installer starts automatically.
• The un-installer starts several times according to the
number of installed USB drivers.
• When the dialog box as at left is displayed, make sure
no equipment is connected to the USB port, then click
[Continue].
• When the screen as at left below appears after the un-
installation, click [Finish].
25
®
Windows XP for example.