Rinnai Evolve 950 RHFE950ETRN Installation Manual page 19

5. Place the fifth white cut out stone (5W)
Place the fifth white cut out stone on the far right burner
bracket.
7. Place middle three large grey stones
Place the remaining three large grey stones (L3, L4, L6) in
the middle of the burner as shown.
9. Place smaller grey and white stones in the middle
Place remaining smaller grey (g) and white (w) stones in
the middle section of the burner
g g
g w
Adding the granules
Refer p. 17 for important information about placement of the granules. The only difference in installation
are the granules will be placed evenly around the stones with particular attention to the front section—
refer fully assembled image on previous page.
w
g
w
g
6. Place back three large grey stones
Place the three large grey stones (L1, L2, L5) at the back
of the burner as shown—they can be positioned over the
locating pins.
8. Place smaller grey and white stones front and back
Place the smaller grey (g) and white (w) stones at the
back and front of the burner.
w
g
w
g
w
Evolve 950 Installation Guide: 12471-A 01-14 | 19
g
g
w
g
g
w